Anti-carburizing Coating for Resin Sand Casting of Low Carbon Steel Based on Composite Silicate Powder Containing Zirconium

Anti-carburizing Coating for Resin Sand Casting of Low Carbon Steel Based on Composite Silicate Powder Containing Zirconium

Blog Article

This paper studied the structure and properties of anticarburizing coating based on composite silicate powder containing zirconium by X-ray diffraction analyzer, thermal expansion tester, digital microscope and other equipment.It is introduced that the application example of the coating in the resin-sand casting of ZG1Cr18Ni9Ti stainless steel impeller.The anti-carburizing effect of the coating on the surface layer of the cast is studied by using direct reading spectrometer and spectrum analyzer.The change of the micro-structure of the coating after casting and cooling is observed by scanning electron microscope.

The analysis of anti-carburizing mechanism Originals Beanie of the coating is presented.The results indicate that the coating possesses excellent suspension property, brush ability, permeability, levelling property and crackresistance.The coating exhibits high strength and low gas evolution.Most of the coating could be automatically stripped off flakily when the casting was shaken out.

The casting possesses excellent surface finish and antimetal penetration effect.The carburizing layer thickness of the stainless steel impeller casting with respect to allowable upper limit of carbon content is about 1mm and maximum carburizing rate is 23.6%.The anticarburizing effect of casting surface is greatly improved than that of zircon powder coating whose maximum carburizing rate is 67.

9% and the carburizing layer thickness with respect to allowable upper limit of carbon content is greater than 2mm.The composite silicate powder containing zirconium coating substantially reduces the zircon Basketball - Shoes - Junior powder which is expensive and radioactive and mainly dependent on imports.The coating can be used instead of pure zircon powder coating to effectively prevent metal-penetration and carburizing of resin-sand-casting surface of low carbon steel, significantly improve the foundry production environment and reduce the production costs.